Article
|
| Özler, Saime Burçe and Bakırcı, Ezgi and Küçükgül, Can and Koç, Bahattin, (2016) “Three-dimensional direct cell bioprinting for tissue engineering”. Published Online First http://dx.doi.org/10.1002/jbm.b.33768 Journal of Biomedical Materials Research Part B: Applied Biomaterials (SCI) |
| Özler, Saime Burçe and Küçükgül, Can and Koç, Bahattin, (2015) “3-boyutlu biyobasım (3D bioprinting)”, Türkiye Klinikleri Tıbbi Onkoloji Özel Dergisi, Vol.8, No.2, 155-161 |
| Küçükgül, Can and Özler, Saime Burçe and İnci, İlyas and Karakaş, Hacer Ezgi and Irmak, Ster and Gözüaçık, Devrim and Taralp, Alpay and Koç, Bahattin, (2015) “3D bioprinting of biomimetic aortic vascular constructs with self-supporting cells”, Biotechnology and Bioengineering, Vol.112, No.4, 811-821 (SCI) |
Book Section / Chapter
|
| Hafezi, Forough and Küçükgül, Can and Özler, Saime Burçe and Koç, Bahattin, Bioprinting: application of additive manufacturing in medicine Additive Manufacturing, Second Edition, Bandyopadhyay, Amit and Bose, Susmita (eds.), Boca Raton, London, New York: CRC Press, October 2019 |
| Özler, Saime Burçe and Küçükgül, Can and Koç, Bahattin, “Bioprinting with live cells” Bioprinting in Regenerative Medicine, Türksen, Kürşad (ed.), Switzerland: Springer, September 2015, 67-88 |
| Hafezi, Forough and Küçükgül, Can and Özler, Saime Burçe and Koç, Bahattin, Bioprinting: application of additive manufacturing in medicine Additive Manufacturing, Bandyopadhyay, Amit and Bose, Susmita (eds.), United States: CRC Press, June 2015, 197-214 |
Papers in Conference Proceedings
|
| Koç, Bahattin and Özler, Saime Burçe and Küçükgül, Can and Altunbek, Mine and Sen, O. and Çulha, M., ” 3D Bioprinting of aortic structures with HDF cells “, Termis EU 2014 Congress, Hoboken, NJ, USA: Wiley, June 2014, 391-392 |
| Koç, Bahattin and Küçükgül, Can and Özler, Saime Burçe and Altunbek, Mine and Sen, O. and Çulha, M., ” 3D Bioprinting of branched vessel constructs “, Termis EU 2014 Congress, Hoboken, NJ, USA: Wiley, June 2014, 95-96 |
| Küçükgül, Can and Özler, Saime Burçe and Karakaş, Hacer Ezgi and Gözüaçık, Devrim and Koç, Bahattin, “3D hybrid bioprinting of macrovascular structures“, Bártolo, Paulo and Fernandes, Paulo (eds.), 3rd ECCOMAS Thematic Conference on Tissue Engineering (ICTE 2013), The Netherlands: Elsevier, June 2013, 183-192 |
