Article
|
| Ghorbani, Morteza and Sözer, Canberk and Alcan, Gökhan and Ünel, Mustafa and Ekici, Sinan and Üvet, Hüseyin and Koşar, Ali, (2018) “Biomedical device prototype based on small scale hydrodynamic cavitation”, AIP Advances, Vol.8, No.3 (SCI) |
| Ghorbani, Morteza and Alcan, Gökhan and Khalili Sadaghiani, Abdolali and Mohammadi, Ali and Ünel, Mustafa and Gözüaçık, Devrim and Koşar, Ali, (2018) “Characterization and pressure drop correlation for sprays under the effect of micro scale cavitation”, Experimental Thermal and Fluid Science, Vol.91, 89-102 (SCI) |
| Alcan, Gökhan and Ghorbani, Morteza and Koşar, Ali and Ünel, Mustafa, (2016) “A new visual tracking method for the analysis and characterization of jet flow”. Published Online First http://dx.doi.org/10.1016/j.flowmeasinst.2016.08.005 Flow Measurement and Instrumentation (SCI) |
| Ghorbani, Morteza and Alcan, Gökhan and Ünel, Mustafa and Gözüaçık, Devrim and Ekici, Sinan and Üvet, Hüseyin and Şabanoviç, Asif and Koşar, Ali, (2016) “Visualization of microscale cavitating flow regimes via particle shadow sizing imaging and vision based estimation of the cone angle”. Published Online First http://dx.doi.org/10.1016/j.expthermflusci.2016.04.026 Experimental Thermal and Fluid Science (SCI) |
| Ghorbani, Morteza and Alcan, Gökhan and Yılmaz, D. and Ünel, Mustafa and Koşar, Ali, (2015) “Visualization and image processing of spray structure under the effect of cavitation phenomenon”, Journal of Physics: Conference Series, Vol.656 (SCI) |
Book Section / Chapter
|
| Alcan, Gökhan and Ghorbani, Morteza and Koşar, Ali and Ünel, Mustafa, Single droplet tracking in jet flow Image Analysis and Recognition: 13th International Conference, ICIAR 2016, in Memory of Mohamed Kamel, Póvoa de Varzim, Portugal, July 13-15, 2016, Proceedings, Campilho, Aurello and Karray, Fakhri (eds.), Switzerland: Springer International Publishing, July 2016, 415-422 |
Papers in Conference Proceedings
|
| Alcan, Gökhan and Ünel, Mustafa and Aran, Volkan and Yılmaz, Metin and Gürel, Çetin and Köprübaşı, Kerem, “Diesel engine NOx emission modeling using a new experiment design and reduced set of regressors“, Proceedings of 18th IFAC Symposium on System Identification (SYSID 2018), IFAC (International Federation of Automatic Control), July 2018, 168-173 |
| Sözer, Canberk and Ghorbani, Morteza and Alcan, Gökhan and Üvet, Hüseyin and Ünel, Mustafa and Koşar, Ali, “Design, prototyping and control of a flexible cystoscope for biomedical applications“, 4th International Conference on Mechanics and Mechatronics Research (ICMMR 2017), IOP Publishing, August 2017 |
| Alcan, Gökhan and Ghorbani, Morteza and Koşar, Ali and Ünel, Mustafa, “Vision based cone angle estimation of bubbly cavitating flow and analysis of scattered bubbles using micro imaging techniques“, 41st Annual Conference of the IEEE Industrial Electronics Society (IECON 2015), USA: IEEE Industrial Electronics Society, November 2015 |
