Publications

Article

Tufani, Ali and Özaydın İnce, Gözde, (2019) “Protein gating by vapor deposited Janus membranes”, Journal of Membrane Science, Vol.575, 126-134 (SCI)
Ormancı-Acar, Türkan and Çelebi, Ferda and Keskin, Başak and Mutlu-Salmanlı, Öykü and Agtas, Meltem and Turken, Türker and Tufani, Ali and İmer, Derya Y. and Özaydın İnce, Gözde and Uçar Demir, Tuğba and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail, (2018) “Fabrication and characterization of temperature and pH resistant thin film nanocomposite membranes embedded with halloysite nanotubes for dye rejection”, Desalination, Vol.429, 20-32 (SCI)
Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Özpınar, Alsan Volkan and Özaydın İnce, Gözde and Koşar, Ali, (2017) “Pool boiling heat transfer characteristics of inclined pHEMA-coated surfaces”, Journal of Heat Transfer (SI), Vol.139, No.11 (CPCI-S, SCI)
Tufani, Ali and Özaydın İnce, Gözde, (2017) “Smart membranes with pH-responsive control of macromolecule permeability”, Journal of Membrane Science, Vol.537, 255-262 (SCI)
Nedaei, Masoumeh and Motezakker, Ahmad Reza and Zeybek, Mehmet Can and Sezen, Meltem and Özaydın İnce, Gözde and Koşar, Ali, (2017) “Subcooled flow boiling heat transfer enhancement using polyperfluorodecylacrylate (pPFDA) coated microtubes with different coating thicknesses”, Experimental Thermal and Fluid Science, Vol.86, 130-140 (SCI)
Bakırcı, Ezgi and Toprakhisar, Burak and Zeybek, Mehmet Can and Özaydın İnce, Gözde and Koç, Bahattin, (2017) “Cell sheet based bioink for 3D bioprinting applications”, Biofabrication, Vol.9, No.2 (SCI)
Balkan, Alper and Armağan, Efe and Özaydın İnce, Gözde, (2017) “Synthesis of coaxial nanotubes of polyaniline and poly(hydroxyethyl methacrylate) by oxidative/initiated chemical vapor deposition”, Beilstein Journal of Nanotechnology, Vol.8, No.1, 872-882 (SCI)
Khabbaz Abkenar, Sirous and Tufani, Ali and Özaydın İnce, Gözde and Kurt, Hasan and Turak, Ayşe and Ow-Yang, Cleva W., (2017) “Transfer printing gold nanoparticle arrays by tuning the surface hydrophilicity of thermo-responsive poly n-isopropylacrylamide (pNIPAAm)”, Nanoscale, Vol.9, No.9, 2969-2973 (SCI)
Nedaei, Masoumeh and Armağan, Efe and Sezen, Meltem and Özaydın İnce, Gözde and Koşar, Ali, (2016) “Enhancemet of flow boiling heat transfer in pHEMA/pPFDA coated microtubes with longitudinal variations in wettability”, AIP Advances, Vol.6, No.3 (SCI)
Tufani, Ali and Özaydın İnce, Gözde, (2015) “Permeability of small molecules through vapor deposited polymer membranes”, Journal of Applied Polymer Science, Vol.132, No.34 (SCI)
Yılmaz, Mehmet and Kuloğlu, Hamit Buğra and Erdoğan, Hakan and Çetin, Saime Şebnem and Yavuz, Mustafa Selman and Özaydın İnce, Gözde and Demirel, Gökhan, (2015) “Light-driven unidirectional liquid motion on anisotropic gold nanorod arrays”, Advanced Materials Interfaces, Vol.2, No.12 (SCI)
Armağan, Efe and Qureshi, Parveen and Özaydın İnce, Gözde, (2015) “Functional nanotubes for triggered release of molecules”, Nanoscience and Nanotechnology Letters, Vol.7, No.1, 79-83 (SCI)
Armağan, Efe and Özaydın İnce, Gözde, (2015) “Coaxial nanotubes of stimuli responsive polymers with tunable release kinetics”, Soft Matter, Vol.11, No.41, 8069-8075 (SCI)
Demiryürek, Rıdvan and Ali, Mariamu Kassim and Özaydın İnce, Gözde, (2014) “A facile method for fabrication of responsive micropatterned surfaces”, Smart Materials and Structures, Vol.23, No.9 (SCI)
Petruczok, Christy D. and Armağan, Efe and Özaydın İnce, Gözde and Gleason, Karen K., (2014) “Initiated chemical vapor deposition and light-responsive cross-linking of poly(vinyl cinnamate) thin films”, Macromolecular Rapid Communications, Vol.35, No.15, 1345-1350 (SCI)
Çıkım, Taha Abdullah and Armağan, Efe and Özaydın İnce, Gözde and Koşar, Ali, (2014) “Flow boiling enhancement in microtubes with crosslinked pHEMA coatings and the effect of coating thickness”, Journal of Heat Transfer, Vol.136, No.8 (SCI)
Kaya, Alihan and Demiryürek, Rıdvan and Armağan, Efe and Özaydın İnce, Gözde and Sezen, Meltem and Koşar, Ali, (2013) “Boiling heat transfer enhancement in mini/microtubes via polyhydroxyethylmethacrylate (pHEMA) coatings on inner microtube walls at high mass fluxes”, Journal of Micromechanics and Microengineering, Vol.23, No.11 (SCI)
Özaydın İnce, Gözde and Armağan, Efe and Erdoğan, Hakan and Büyükserin, Fatih and Uzun, Lokman and Demirel, Gökhan, (2013) “One-dimensional surface-imprinted polymeric nanotubes for specific biorecognition by initiated chemical vapor deposition (iCVD)”, ACS Applied Materials & Interfaces, Vol.5, No.14, 6447-6452 (SCI)
Özaydın İnce, Gözde and Matin, Asif and Khan, Zafarullah and Zaidi, S. M. Javaid and Gleason, Karen K., (2013) “Surface modification of reverse osmosis desalination membranes by thin-film coatings deposited by initiated chemical vapor deposition”, Thin Solid Films, Vol.539, 181-187 (SCI)
Özaydın İnce, Gözde and Coclite, Anna Maria and Gleason, Karen K., (2012) “CVD of polymeric thin films: applications in sensors, biotechnology, microelectronics/organic electronics, microfluidics, MEMS, composites and membranes”, Reports on Progress in Physics, Vol.75, No.1 (SCI)
Yang, Rong and Xu, Jingjing and Özaydın İnce, Gözde and Wong, Sze Yinn and Gleasont, Karen K., (2011) “Surface-tethered zwitterionic ultrathin antifouling coatings on reverse osmosis membranes by initiated chemical vapor deposition”, Chemistry of Materials, Vol.23, No.5, 1263-1272 (SCI)
Kramer, Nicolaas J. and Sachteleben, Elmer and Özaydın İnce, Gözde and van de Sanden, Richard and Gleason, Karen K., (2010) “Shape memory polymer thin films deposited by initiated chemical vapor deposition”, Macromolecules, Vol.43, No.20, 8344-8347 (SCI)

Papers in Conference Proceedings

Bakırcı, Ezgi and Toprakhisar, Burak and Zeybek, Mehmet Can and İnce, Gözde and Koç, Bahattin, “Cell sheet as a bioink for 3D bioprinting“, Towards Future Regenerative Therapies (TERMIS-EU 2016), Uppsala, Sweden: AO Research Institute, July 2016, 461-461
Khalili Sadaghiani, Abdolali and Şişman, Yağmur and Özaydın İnce, Gözde and Koşar, Ali, ” An experimental study on flow boiling characteristics of phema nano-coated surfaces in a microchannel “, 5th ASME International Conference on Micro/Nanoscale Heat and Mass Transfer (MNHMT2016), ASME (American Society of Mechanical Engineers), January 2016
Koşar, Ali and Çıkım, Taha Abdullah and Özaydın İnce, Gözde and Armağan, Efe, ” Flow boiling enhancement in microtubes with pHEMA coatings “, ASME International Mechanical Engineering Congress and Exposition, New York, NY: ASME (American Society of Mechanical Engineers), November 2013