Research

Article

Özlü, Emre and Ebrahimi Araghizad, Arash and Budak, Erhan, (2020) “Broaching tool design through force modelling and process simulation”, CIRP Annals – Manufacturing Technology, Vol.69, No.1, 53-56 (SCI)
Rahimzadeh Berenji, Kaveh and Karagüzel, Umut and Özlü, Emre and Budak, Erhan, (2019) “Effects of turn-milling conditions on chip formation and surface finish”, CIRP Annals – Manufacturing Technology, Vol.68, No.1, 113-116 (SCI)
Çakır, Esin and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan, (2018) “Investigation of temperature distribution in orthogonal cutting through dual-zone contact model on the rake face”. Published Online First http://dx.doi.org/10.1007/s00170-017-1479-3 International Journal of Advanced Manufacturing Technology (SCI)
Özlü, Emre and Molinari, Alain and Budak, Erhan, (2010) “Two-zone analytical contact model applied to orthogonal cutting
“, Machining Science and Technology, Vol.14, No.3, 323-343 (SCI)
Özlü, Emre and Budak, Erhan and Molinari, A., (2009) “Analytical and experimental investigation of rake contact and friction behavior in metal cutting”, International Journal of Machine Tools and Manufacture, Vol.49, No.11, 865-875 (SCI)

Papers in Conference Proceedings

Yüksel, Esra and Budak, Erhan and Özlü, Emre and Oral, Ahmet and İğrek, Fatih and Tosun, Fulya, “Prediction of thermal growth in a high-speed spindle by considering thermo-mechanical behavior“, 2nd International Conference on Thermal Issues in Machine Tools, Prague, Czech Republic: MM Science Journal, April 2021, 4526-4533
Yüksel, Esra and Özlü, Emre and Oral, Ahmet and Tosun, Fulya and İğrek, Osman Fatih and Budak, Erhan, “Design and analysis of a 5-axis gantry CNC machine tool“, Mansour, G. and Tzetzis, D. and Kyratsis, P. (eds.), 7th International Conference of Materials and Manufacturing Engineering (ICMMEN 2020), EDP Sciences, August 2020
Rahimzadeh Berenji, Kaveh and Özlü, Emre and Budak, Erhan, ” An experimental study on surface errors in orthogonal turn-milling process “, 9th International Congress on Machining (UTIS 2018), UTIS, November 2018
Çoskun, Sıla and Baytok, Esma and Özlü, Emre and Sert Alağaç, Melike and Akın, Cenk, ” Experimental analysis of orange peel problem in turning of titanium alloys “, 9th International Congress on Machining (UTIS 2018), UTIS, November 2018
Barzegar Osgouei, Zahra and Özlü, Emre and Altan, Erhan and Budak, Erhan, ” Heat modeling for third deformation zone “, 9th International Congress on Machining (UTIS 2018), UTIS, November 2018
Barzegar Osgouei, Zahra and Budak, Erhan and Özlü, Emre, ” Modeling of tool temperature in orthogonal cutting “, 8th International Symposium on Machining, UTIS, November 2017
Bilgen, Samet and Özlü, Emre and Erberdi, Muharrem S. and Budak, Erhan, ” An experimental study of CNC machine tool feed drive limits and cycle time prediction for a 3-axis milling operation “, Kaftanoğlu, Bilgin and Budak, Erhan (eds.), 8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Ankara: Atilim University, June 2015
Baytok, Esma and Özlü, Emre and Budak, Erhan, ” Titanyum ve alaşımlarının yüksek performanslı işlenmesi (High performance machining of titanium and its alloys) “, 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye: Uludağ Üniversitesi, October 2014
Çakır, Esin and Karagüzel, Umut and Olgun, Utku and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan, ” Dik kesme durumunda kesme sıcaklığının analitik modellenmesi ve deneysel olarak doğrulanması (Modeling of temperature distribution in orthogonal cutting and experimental verfication) “, 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Izmir, Turkey: Ege University 2013, 129-138
Özlü, Emre and Budak, Erhan, ” Process modeling of orthogonal cutting with hone radiused tools
“, 12th CIRP Conference on Modeling and Machining Operations, San Sebastian, Spain: CIRP (International Academy for Production Engineering) 2009
Özlü, Emre and Budak, Erhan, ” Analytical stability models for turning and boring operations “, 2nd International Conference on High Speed Cutting,, June 2006
Özlü, Emre and Budak, Erhan, ” Analytical prediction of stability limit in turning operations “, CIRP International Workshop on Modeling of Machining Operations,, May 2006, 99-106
Özlü, Emre and Budak, Erhan, ” Tornalama işlemlerinde süreç kararlılığının analitik olarak modellenmesi “, TİMAK Kongresi,, April 2006

Working Paper / Technical Report

Ulusoy, Gündüz and Kılıç, Kemal and Özlü, Emre and Altekin, Fatma Tevhide and Çatay, Bülent and Budak, Erhan and Pasin, Merih and Karaata, Enver Selçuk and Varandi, Siamak, “Sanayide Dijitalleşme Stratejileri Çalıştayı – Taslak rapor”, September 2017