Publications

Article

Kızıltaş, Güllü, () “Micro-computerized tomography analysis and pull-out bond strength test of different fiber posts luted with self-adhesive cements”, Journal of Adhesion Science and Technology (forthcoming) (SCI)
Kamadan, Abdullah and Kızıltaş, Güllü and Patoğlu, Volkan, (2019) “A systematic design selection methodology for system-optimal compliant actuation”, Robotica, Vol.37, No.4, 656-674 (SCI)
Berkün, Işıl and Kızıltaş, Güllü, (2018) “Optimization of dry powder deposition parameters for production of large substrates using functionally graded ceramics”, International Journal of Applied Ceramic Tecnology, Vol.15, No.5, 1199-1211 (SCI)
Kamadan, Abdullah and Kızıltaş, Güllü and Patoğlu, Volkan, (2017) “Co-design strategies for optimal variable stiffness actuation”, IEEE/ASME Transactions on Mechatronics, Vol.22, No.6, 2768-2779 (SCI)
Yılmaz, Ayça and Helvacıoğlu-Yiğit, Dilek and Gür, Cansu and Ersev, Handan and Kızıltaş, Güllü and Avcu, Egemen and Baydemir, Canan and Abbott, Paul Vincent, (2017) “Evaluation of dentin defect formation during retreatment with hand and rotary instruments: a micro-CT study”, Scanning (SCI)
Tansık, Gülistan and Kılıç, Erden and Beter, Mustafa and Demiralp, Bahtiyar and Kızıltaş, Güllü and Can, Nuray and Özkan, Hüseyin and Ergül, Elif and Güler, Mustafa O. and Tekinay, Ayşe B., (2016) “A glycosaminoglycan mimetic peptide nanofiber gel as an osteoinductive scaffold”, Biomaterials Science, Vol.4, No.9, 1328-1339 (SCI)
Sarıdağ, Serkan and Helvacıoğlu-Yiğit, Dilek and Özcan, Mutlu and Avcu, Egemen and Kızıltaş, Güllü, (2016) “Micro-computerized tomography analysis of cement voids and pull-out strength of glass fiber posts luted with self-adhesive and glass-ionomer cements in the root canal”, Journal of Adhesion Science and Technology, Vol.30, No.14, 1585-1595 (SCI)
Helvacıoğlu-Yiğit, D. and Yılmaz, A. and Kızıltaş-Şendur, Güllü and Aslan, Onur Şevket and Abbott, P. V., (2014) “Efficacy of reciprocating and rotary systems for removing root filling material: a micro-computed tomography study”, Scanning, Vol.36, No.6, 576-581 (SCI)
El-Kahlout, Yasser and Kızıltaş, Güllü, (2011) “Effective interpolation scheme for multi-resonant antenna responses: generalised Stoer-Bulirsch algorithm with adaptive sampling”, IET Microwaves, Antennas & Propagation, Vol.5, No.15, 1849-1856 (SCI)
El-Kahlout, Yasser and Kızıltaş, Güllü, (2011) “Rational interpolation scheme based on Bayesian classifiers for multi-resonance response of radio frequency devices”, IET Microwaves, Antennas & Propagation, Vol.5, No.5, 576-582 (SCI)
Erbatur, Kemalettin and Seven, Utku and Taşkıran, Evrim and Koca, Özer and Yılmaz, Metin and Ünel, Mustafa and Kızıltaş, Güllü and Şabanoviç, Asif and Onat, Ahmet, (2011) “Design and control of the humanoid robot SURALP”, Turkish Journal of Electrical Engineering and Computer Sciences, Vol.19, No.5, 725-731 (SCI)
El-Kahlout, Yasser and Kızıltaş, Güllü, (2011) “Inverse synthesis of electromagnetic materials using homogenization based topology optimization”, Progress in Electromagnetics Research-Pier, Vol.115, 343-380 (SCI)
Maşazade, Engin and Rajagopalan, Ramesh and Varshney, Pramod K. and Mohan, Chilukuri K. and Kızıltaş, Güllü and Keskinöz, Mehmet, (2010) “A multiobjective optimization approach to obtain decision thresholds for distributed detection in wireless sensor networks”, IEEE Transactions on Systems Man and Cybernetics, Part B: Cybernetics, Vol.40, No.2, 444-457 (SCI)
Öğüt, Erdem and Kızıltaş, Güllü and Şendur, Kürşat, (2010) “Circularly polarized localized near-field radiation at the nanoscale”, Applied Physics B: Lasers and Optics, Vol.99, No.1-2, 67-74 (SCI)
Zhou, Yijun and Koulouridis, Stavros and Kızıltaş, Güllü and Volakis, John L., (2006) “A novel 1.5 ” quadruple antenna for tri-band GPS applications”, IEEE Antennas and Wireless Propagation Letters, Vol.5, No.1, 224-227 (SCI)
Koulouridis, Stavros and Kızıltaş , Güllü and Zhou, Yijun and Hansford, Derek J. and Volakis, John L., (2006) “Polymer-ceramic composites for microwave applications: fabrication and performance assessment”, IEEE transactions on microwave theory and techniques, Vol.54, No.12, 4202-4208
Volakis, John L. and Mumcu, G. and Sertel, K. and Chen, C. C. and Lee, M. and Kramer, B. and Psychoudakis, D. and Kızıltaş, Güllü, (2006) “Antenna miniaturization using magnetic photonic and degenerate band edge crystals”, IEEE Antennas and Propagation Magazine, Vol.48, No.5, 12-28 (SCI)

Book Section / Chapter

Kızıltaş, Güllü, Antenna design and optimization using FE-BI methods Frequency Domain Methods, (forthcoming)
Kızıltaş, Güllü and Papila, Melih and Yılmaz, Bengisu and Bilge, Kaan, Challenges in micro-CT characterization of composites Micro-Computed Tomography (Micro-CT) in Medicine and Engineering, Orhan, Kaan (ed.), Switzerland: Springer, Cham, July 2019, 225-246
Çakmakçı, Melih and Kızıltaş, Güllü and Durak, Umut, Simulation-based engineering Guide to Simulation-Based Disciplines: Advancing Our Computational Future, Mittal, Saurabh and Durak, Umut and Ören, Tuncer (eds.), NY, USA: Springer International Publishing, July 2017

Papers in Conference Proceedings

Maşazade, Engin and Rajagopalan, Ramesh and Varshney, Pramod K. and Kızıltaş, Güllü and Keskinöz, Mehmet, ” Evaluation of Local Decision Thresholds for Distributed Detection in Wireless Sensor Networks using Multiobjective Optimization “, 42nd Asilomar Conference on Signals, Systems and Computers, USA: IEEE (forthcoming)
Aydın, Mehmet Serhat and Kızıltaş, Güllü and Kuloğlu, Büşra, ” Fabrication of composite bone scaffolds with controlled multi-scale porosity using non-solvent induced phase separation based 3D printing “, Materials Research Society Fall 2018 Meetings, MRS (Materials Research Society), November 2018
Aydın, Mehmet Serhat and Kuloğlu, Büşra and Sipahi, Çağla and Çayır, Berkay and Kızıltaş, Güllü, ” Integrated design scheme based on mechano-biology and level set based topology optimization for bone scaffolds “, Materials Research Society Fall 2018 Meetings , MRS (Materials Research Society), November 2018
Kamadan, Abdullah and Kızıltaş, Güllü and Patoğlu, Volkan, ” A systematic analysis of spring symmetry on optimality of antagonistic variable stiffness actuation “, Bicchi, A. and Okamura, A. (eds.), IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2017), USA: IEEE (Institute of Electrical and Electronics Engineers), December 2017, 5687-5693
Saygıner, Osman and Kızıltaş, Güllü, ” Fabrication of functionally graded ceramic- polymer dielectrics via freeze casting for RF applications “, IEEE AP-S Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, USA: IEEE (Institute of Electrical and Electronics Engineers), July 2017
Saygıner, Osman and Kızıltaş, Güllü, ” Integrated topology optimization of volumetric antenna substrates and conductor surfaces for broadband microstrip patch antennas “, IEEE AP-S Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, USA: IEEE (Institute of Electrical and Electronics Engineers), July 2017
Yılmaz, A. and Helvacıoğlu-Yiğit, D. and Gür, C. and Ersev, H. and Kızıltaş, Güllü and Avcu, E. and Baydemir, C. and Abbott, P. V., ” European Society of Endodontology: Abstracts from the Biennial Congress 2015 (Micro-CT evaluation of dentine defect formation during re-treatment with hand and
rotary instruments)
“, 17th Biennial European Society of Endodontology Congress, 0143-2885 (Print) 1365-2591 (Online): Wiley, January 2016, 114-114
Kızıltaş, Güllü, ” Design of artifical metmaterials with desired multi-physical properties using topology optimization “, USNC-URSI Radio Science Meeting (Joint with AP-S Symposium 2015), USA: IEEE (Institute of Electrical and Electronics Engineers), July 2015, 106-106
Kızıltaş, Güllü, ” Micro-CT and pull-out bond strength analysis of different fiber posts and different self-adhesive luting cements “, 22. International Congress of the Turkish Prosthodontics and Implantology Association, Antalya: Turkish Prosthodontics and Implantology Association 2015
Sarıdağ, Serkan and Helvacıoğlu Yiğit, Dilek and Avcu, Egemen and Kızıltaş, Güllü and Özcan, Mutlu, ” Pull-out strength of different diameter fiber reinforced posts to different type self-adhesive luting cements (Farklı çapta fiber postların farklı tipte self adeziv simanlar ile bağlanma dayanımları) “, 21. TDA International Dental Congress, Istanbul, Turkey: Turkish Dental Association 2015
Kamadan, Abdullah and Kızıltaş, Güllü and Patoğlu, Volkan, ” Değişken esneklikte eyleme için optimal ortak-tasarım stratejileri “, Türkiye Otonom Robotlar Konferansı (TORK 2014), Ankara, Türkiye: ODTÜ (Ortadoğu Teknik Üniversitesi), November 2014
Eskin, Murat Gökhan and Yiğit, Hüseyin and Kızıltaş, Güllü, ” Topology optimization based inverse synthesis of spectral 3D metamaterials “, IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, USA: IEEE (Institute of Electrical and Electronics Engineers), July 2014, 83-83
Aslan, Onur Şevket and Kızıltaş, Güllü, ” Computational design of tissue scaffolds for cartilage repair via the level-set method “, 11th World Congress of the International Cartilage Repair Society (ICRS 2013), ICRS Library: International Cartilage Repair Society, September 2013
İnce, Fatma Gül and Kızıltaş, Güllü, ” A new fabrication technique for the development of flexible mosaic substrates for conformal RF devices “, IEEE International Symposium on Antennas and Propagation and USNC-URSI National Radio Science Meeting (AP-S/USNC-URSI 2013), USA: IEEE (Institute of Electrical and Electronics Engineers), July 2013
Eskin, Murat Gökhan and Kızıltaş, Güllü, ” Design of ‘lossy’ metamaterials using inverse topology optimization “, IEEE International Symposium on Antennas and Propagation and USNC-URSI National Radio Science Meeting (AP-S/USNC-URSI 2013), USA: IEEE (Institute of Electrical and Electronics Engineers), July 2013
Yiğit, Hüseyin and Kızıltaş, Güllü, ” Level-set based topology optimization of MM-Wave large aperture lens designs “, IEEE International Symposium on Antennas and Propagation and USNC-URSI National Radio Science Meeting (AP-S/USNC-URSI 2013), USA: IEEE (Institute of Electrical and Electronics Engineers), July 2013
Aslan, Onur Şevket and Kızıltaş, Güllü, ” Computational design of tissue scaffolds via the level-set method “, Tissue Engineering and Regenerative Medicine International Society (TERMIS-EU 2013), San Ramon, CA, USA: Tissue Engineering International and Regenerative Medicine Society, June 2013
Başaran, Necdet and Kızıltaş, Güllü, ” Fabrication of polymer-ceramic composite bone scaffolds with controlled multi-scale porosity “, Hoboken, NJ, USA: Wiley-Blackwell, September 2012, 35-35
Kızıltaş, Güllü and Başaran, Necdet, ” Level set based design optimization framework for active scaffolds “, Hoboken, NJ, USA: Wiley-Blackwell, September 2012, 392-392
Doğan, Mustafa and Kızıltaş, Güllü and Üstüner, Fatih, “Optimization of aperture coupled microstrip patch antennas“, Progress In Electromagnetics Research Symposium, Cambridge, USA: The Electromagnetics Academy, September 2010, 657-660
Öğüt, Erdem and Kızıltaş, Güllü and Şendur, Kürşat, “Obtaining circularly polarized optical spots beyond the diffraction limit using plasmonic nano-antennas“, Govorov, A. O. and Rogach, A. L. and Wang, Z. M. and Wang, J. K. and Shalaev, V. M. (eds.), 2009 MRS Fall Meeting, Warrendale, PA, USA: Materials Research Society, February 2010
Öğüt, Erdem and Kızıltaş, Güllü and Şendur, Kürşat, “Circularly polarized localized near-field radiation at the nanoscale“, 22nd Annual Meeting of the IEEE-Photonics-Society, Piscataway, New Jersey, USA: IEEE Photonics Society, October 2009, 160-161
Erbatur, Kemalettin and Seven, Utku and Taşkıran, Evrim and Koca, Özer and Yılmaz, Metin and Ünel, Mustafa and Kızıltaş, Güllü and Şabanoviç, Asif and Onat, Ahmet, ” İnsansı robot platformu SURALP “, Erbatur, Kemalettin (ed.), Otomatik Kontrol Ulusal Toplantısı 2009 (TOK’09), İstanbul, Türkiye: Yıldız Teknik Üniversitesi, October 2009
Erbatur, Kemalettin and Seven, Utku and Taşkıran, Evrim and Koca, Özer and Yılmaz, Metin and Ünel, Mustafa and Kızıltaş, Güllü and Şabanoviç, Asif and Onat, Ahmet, ” SURALP: a new full-body humanoid robot platform “, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2009), USA: IEEE (Institute of Electrical and Electronics Engineers), October 2009, 4949-4954
Berkün, Işıl and Kızıltaş, Güllü and Şendur, Kürşat, ” A multiobjective optimization framework for nano-antennas via normal boundary intersection (NBI) method “, IEEE AP-S International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting 2009, USA: IEEE (Institute of Electrical and Electronics Engineers), June 2009
Taşdemir, Zuhal and Kızıltaş, Güllü, ” Flexible ceramic-polymer composite substrates for miniaturized RF applications via tape casting “, IEEE AP-S International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting 2009, USA: IEEE (Institute of Electrical and Electronics Engineers), June 2009
El-Kahlout, Yasser and Kızıltaş, Güllü, ” Optimally designed microstructures of electromagnetic materials via inverse homogenization “, IEEE Antennas and Propagation Society International Symposium, 2009 (APSURSI ’09), USA: IEEE (Institute of Electrical and Electronics Engineers), June 2009, 1-4
Kızıltaş, Güllü and El-Kahlout, Yasser, ” Systematic synthesis framework for novel electromagnetic materials “, 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO-08), Daejeon, Korea: ISSMO (International Society for Structural and Multidisciplinary Optimization), June 2009
Taşdemir, Zuhal and Kızıltaş, Güllü, “Flexible ceramic-polymer composite substrates with spatially variable dielectrics for miniaturized RF applications“, Srinivasan, G. and Bichurin, M. I. and Priya, S. and Sun, N. X. (eds.), MRS Spring Meeting 2009, Warrendale, PA, USA: Material Research Society 2009
Erbatur, Kemalettin and Seven, Utku and Taşkıran, Evrim and Koca, Özer and Kızıltaş, Güllü and Ünel, Mustafa and Şabanoviç, Asif and Onat, Ahmet, “SURALP-L – İnsansı robot platformu bacak modülü“, Erbatur, Kemalettin (ed.), Otomatik Kontrol Türk Milli Komitesi, Otomatik Kontrol Ulusal Toplantısı TOK’08, İstanbul: İstanbul Teknik Üniversitesi, November 2008
Karabaşoğlu, Orkun and Kızıltaş, Güllü, ” Comparative analysis of approximation methods in electromagnetic design “, 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada: AIAA, September 2008
Şendur, Kürşat and Karabaşoğlu, Orkun and Baran, Eray Abdurrahman and Kızıltaş, Güllü, “Optimization of plasmonic nano-antennas“, Kawata, Satoshi (ed.), MRS Conference, Warrandale, Pennsylvania, USA: Material Research Society, August 2008
El-Kahlout, Yasser and Kızıltaş, Güllü, ” Global design optimization of complex electromagnetic devices via efficient
frequency response interpolations
“, 2008 IEEE International Symposium on Antennas and Propagation, USA: IEEE, July 2008
Ünal, Ramazan and Kızıltaş, Güllü and Patoğlu, Volkan, ” Multi-criteria design optimization of parallel robots “, IEEE International Conference on Cybernetics and Intelligent Systems and IEEE International Conference on Robotics, Automation and Mechatronics, CIS -RAM 2008, USA: IEEE (Institute of Electrical and Electronics Engineers) 2008, 577-583
Ünal, Ramazan and Kızıltaş, Güllü and Patoğlu, Volkan, ” A multi-criteria design optimization framework for haptic interfaces “, IEEE Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, Haptics Symposium 2008, USA: IEEE 2008, 231-238
Ünal, Ramazan and Patoğlu, Volkan and Kızıltaş, Güllü, ” Rehabilitasyon robotunun empedans kontrole göre tasarım optimizasyonu “, TOK’07 Otomatik Kontrol Ulusal Toplantısı, İstanbul, Türkiye: Otomatik Kontrol Türk Milli Komitesi, September 2007, 134-139
Karabaşoğlu, Orkun and Kızıltaş, Güllü, “Design optimization of artificial magneto-dielectrics for RF applications
“, Metanaterials’2007: First International Congress on Advanced Electromagnetic Materials in Microwaves and Optics, Rome, Italy: EU 6th Framework Metamorhose Network of Excellence 2007
El-Kahlout, Yasser and Kızıltaş, Güllü, “An Efficient optimization framework for material and conductor designs of antennas“, International Conference on Electromagnetics in Advanced Applications, ICEAA’07, Piscataway, USA: IEEE 2007
Nergiz, Zeynep Saide and Kızıltaş, Güllü, ” Optimization of dry powder deposition parameters for the production of dielectric and magneto-dielectric composites “, Materials Science & Technology 2007 Conference and Exhibit, Westerville, Ohio, USA: American Ceramics Society 2007
El-Kahlout, Yasser and Kızıltaş, Güllü, “Bayesian trained rational functions for electromagnetic design optimization“, 2007 IEEE AP-S International Symposium, Piscataway, USA: IEEE 2007
Volakis, John L. and Kızıltaş, Güllü, ” Novel materials for RF devices “, 2007 IEEE AP-S International Symposium, Piscataway, USA: IEEE 2007
Kızıltaş, Güllü and Wing, Zach N., ” Automated fabrication of three dimensional dielectric composites for RF applications “, IEEE Antennas and Propagation Society International Symposium and USNC/URSI National Radio Science 2006 , Albuquerque, USA: IEEE, July 2006
Kızıltaş, Güllü, ” Concurrent design of conductor shape and artificial material composites for RF applications “, 2006 IEEE Antennas and Propagation Society International Symposium and USNC/URSI National Radio Science AMEREM Meetings, Albuquerque, USA: IEEE, July 2006
Kızıltaş, Güllü, ” Design and fabrication of three dimensional dielectric and magnetic composites for Satcom antenna applications “, IEEE Antennas and Propagation Society International Symposium 2006, Albuquerque, USA: IEEE, July 2006, 2265-2268
Kızıltaş, Güllü, ” Topology optimization and fabrication of multi-material dielectrics for antenna performance improvements “, III European Conference on Computational Solid and Structural Mechanics,, June 2006

Projects

-, YÜKSEK PERFORMANSLI RF VE MM DALGA BOYU İÇİN PCB TABAN MALZEMESİ VE PAKETLEME TEKNOLOJİSİ GELİŞTİRMESİNE
, August 2019
-, Etkin İyileşme Amaçlı 3-Boyutlu Kemik Doku İskeletlerinin Topoloji Optimizasyon Yöntemleri ile Bilgisayar Destekli Entegre Tasarımı, funding: Tübitak 1003- BM0102 DOKU REJENERASYONUNU HEDEFLEYEN BIYOMALZEME VE DOKU MÜHENDISLIGI ÜRÜNLERININ GELISTIRILMESI 2014
-, Proof Of Principle Of Energy Storage In Coherent Quantum Systems, funding: Lockheed Martin Corporate Engineering Technology, November 2014
-, Radar Görünmezlik Amaçlı Hibrit Yapısal Kompozit Malzemelerin Çokdisiplinli Optimal Tasarımı ve Geliştirilmesi, funding: Tübitak 1007-SAVTAG – SSM – 2013 – 05 2015, Note: Please note that the that project’s passed first stage evaluation and is within the second stage evaluation process
-, Taret Sistemi Tasarımı ve Prototip Geliştirilmesi, funding: ASELSAN 2014
-, A hybrid design optimization framework for material based design of miniaturized antennas, funding: TÜBİTAK- İkili İşbirikleri (Yunanistan) GSRT (2020) Programı 2013
-, Lilliputian UWB Antennas, Advanced Ceramics Manufacturing, funding: Department of Defense Rapid Innovation Fund 2013
-, Seramik Polimer Tabanlı Kompozit Malzeme Tabakaların
Yüzeye Uyumlu Anten Uygulamaları İçin Tasarımı ve Üretimi, funding: Tübitak 1001, April 2013
-, Otobüs Araç Platformu – Alternatif İleri Enerji ve Malzeme Teknolojileri , funding: TUBITAK 2008
-, Robot Assisted Rehabilitation System (Robot Destekli Rehabilitasyon Sistemi), funding: TUBITAK, November 2007
-, Yapay Kompozitlerin Topoloji Optimizasyon Yöntemleri ile Üstün Nitelikli Antenler için Tasarımı ve Üretimi, February 2007
-, İki bacaklı insansı Robot Tasarım, Imalat ve Kontrolü , July 2006
-, Optimal Design & Fabrication of Electromagnetic Metamaterials for Milimeter and Microwave Applications (4M), funding: AB 6. ÇP Marie Curie IRG / EU FP6 Marie Curie IRG, January 2006
-, Optimal Design and Fabrication of Electromagnetic Metamaterials for Millimeter and Microwave Applications, funding: European Commission, September 2006

Working Paper / Technical Report

Ünal, Ramazan and Kızıltaş, Güllü and Patoğlu, Volkan, “A Multi-criteria design optimization framework for haptic interfaces”, September 2007, Sabancı University ID:SU_FENS_2007/0014
Nergiz, Zeynep Saide and Kızıltaş, Güllü, “Dry powder deposition for fabrication of electromagnetic devices using textured dielectric and magnetic ceramics”, December 2007, Sabancı University ID:SU_FENS_2007/0022

Zhou, Y., Koulouridis, S., Kiziltas G., .Volakis, J.L. (2006) A Novel 1.5” Quadruple Antenna for Tri-Band GPS Applications. AWPL 5, Nr: 1, 224-227.

Volakis, J. L., Mumcu, G., Sertel, K., Chen, C.-C., Lee, M., Kramer, B., Psychoudakis, D., Kiziltas, G. (2006) Antenna Miniaturization using Magnetic Photonic and Degenerate Band Edge Crystals. IEEE AP Magazine 48, 5, 12-28.

Koh, Y., Halloran, J. W., Kiziltas, G., Psychoudakis, D., Volakis, J.L. (2005) Thermoplastic Green Machining for Textured Dielectric Substrate for Broadband Miniature Antenna. J. of Am. Cer. Soc. 88, 2, 297-302.

Kiziltas, G., Volakis, J.L., Kikuchi, N. (2005) Design of a frequency selective structure with inhomogeneous substrates as a thermo-photovoltaic filter. IEEE Trans. on AP, 53, 7, 2282-2289.

Kiziltas, G., Kikuchi, N., Volakis, J.L., Halloran, J. (2004) Dielectric material optimization for electromagnetic applications using SIMP. Archives of Comp. Methods in Eng. 11, 4, 2004, 355-388.

Kiziltas, G., Psychoudakis D., Volakis, J. L., Kikuchi, N. (2003) Topology design optimization of dielectric substrates for bandwidth improvement of a patch antenna. IEEE Trans. on AP 51, 10, 2732 – 2743.

35 Refereed Conference Papers