Publications

International Journal Publications

  • Tunc, L.T., Zatarain M., (2019). Stability optimal selection of stock shape and tool axis in finishing of thin-wall parts, CIRP Annals, 68-1,
  • Tunc, L. T. ,(2019). Smart tool path generation for 5-axis ball-end milling of sculptured surfaces using process models. Robotics and Computer-Integrated Manufacturing, 56, 212-221.
  • Tunc, L. T., Mohammadi, Y., & Budak, E. (2018). Destabilizing effect of low frequency modes on process damped stability of multi-mode milling systems. Mechanical Systems and Signal Processing, 111, 423-441.
  • Tunc, L. T., & Ozsahin, O. (2018). Use of inverse stability solutions for identification of uncertainties in the dynamics of machining processes. Advances in Manufacturing, 6(3), 308-318.
  • Tunc, L. T. (2018). Prediction of tool tip dynamics for generalized milling cutters using the 3D model of the tool body. The International Journal of Advanced Manufacturing Technology, 95(5-8), 1891-1909.
  • Tunc L.T., Stoddard D., (2017), Selection of tool path pattern in robotic milling for increased chatter-free material removal. Special Issue on “machining chatter”- International Journal of Advanced Manufacturing Technology, 89, 2907, DOI: https://doi.org/10.1007/s00170-016-9896-2.
  • Ozkirimli, O.M., Tunc L.T., Budak E., (2016) Generalized Model for Dynamics and Stability of Multi-Axis Milling with Complex Tool Geometries, Journal of Materials Processing Technology, 238, 446-458.
  • Tunc L.T., Budak E., Bilgen S., Zatarain, M. (2016), Process simulation integrated tool axis selection for 5-axis toolpath generation, CIRP Annals-Manufacturing Technology– 65(1), 381-384.
  • Tunc, L.T. (2016), Rapid extraction of machined surface data through inverse geometrical solution of tool path information. The International Journal of Advanced Manufacturing Technology, 1-10. DOI:10.1007/s00170-016-8439-1
  • Tunc L.T., Shaw J., (2016), Investigation of the Effects of Stewart Platform Type Industrial Robot on Stability of Robotic Milling, The International Journal of Advanced Manufacturing Technology, 1-14. DOI:10.1007/s00170-015-7600-6.
  • Tunc L.T., Ozkirimli, O., Budak E., (2015), Machining Strategy Development and Parameter Selection in 5-axis Milling Based on Process Simulations, International Journal of Advanced Manufacturing Technology, http://dx.doi.org/10.1007/s00170-015-8001-6.
  • Tunc L.T., Shaw J., (2015), Experimental Study on Investigation of Dynamics of Hexapod Robot for Mobile Machining, International Journal of Advanced Manufacturing Technology, http://dx.doi.org/10.1007/s00170-015-7600-6.
  • Tunc L., Ozkirimli O., Budak E., (2015), Generalized Cutting Force Model in Multi Axis Milling Using a New Engagement Boundary Determination Approach, International Journal of Advanced Manufacturing Technology, 77:341-355 http://dx.doi.org/10.1007/s00170-014-6453-8.
  • Tunc L.T., Budak E., (2013), Identification and Modeling of Process Damping in Milling., Journal of Manufacturing Science and Engineering, Transactions of the ASME, 135, Issue: 3. DOI: 10.1115/1.4023708
  • Budak E., Tunc L.T., Alan S., Özgüven H.N., (2012), Prediction of Workpiece Dynamics and its Effects on Chatter Stability in Milling, CIRP Annals – Manufacturing Technology – http://dx.doi.org/10.1016/j.cirp.2012.03.144
  • Tunc L.T., Budak E. (2012), Effects of Cutting Conditions and Tool Geometry on Process Damping in Machining, International Journal of Machine Tools & Manufacture, 57: 10-19.
  • Ozturk E., Tunc L.T., Budak E., (2011), Analytical Methods for Increased Productivity in 5-axis Ball-end Milling, J. Mechatronics and Manufacturing Systems, Vol.4, No:3/4,2011
  • Budak E., Tunc L.T., (2010), Identification and Modeling of Process Damping in Turning and Milling Using a New Approach, CIRP Annals, Manufacturing Technology– 59 pp.403-408
  • Ozturk E., Tunc L.T., Budak E., (2009), Investigation of Effect of Lead and Tilt Angle in 5-Axis Ball-End Milling Processes, Journal of Machine Tool & Manufacture, 49:1053-1062, DOI: 10.1016/j.ijmachtools.2009.07.013
  • Budak E., Tunc L.T. (2009), A New Method for Identification and Modeling of Process Damping in Machining, Transactions of the ASME, Manufacturing Science and Engineering, 131 :1-10
  • Budak E, Ozturk E, Tunc L.T. (2009) Modeling and simulation of 5-axis milling processes, CIRP Annals – Manufacturing Technology, 58 :347-350 DOI: 10.1016/j.cirp.2009.03.044
  • Tunc, L.T., Budak, E., (2009) Extraction of Milling Conditions from CAM Data for process simulation, International Journal of Advanced Machining Technology, 43:538-550, DOI: 10.1007/s00170-008-1735-7

International Conference Publications

  • July 2017   Maurotto, A, Tunc, L.T., Effects of Chattering on Surface Integrity in Robotic Milling of Alloy 690, 2017 ASME Pressure Vessels & Piping Conference, Hawaii, USA.
  • June 2017   Mohammadi Y., Tunc, L.T., Budak E., Investigation of Process Damping Effect for Multi-mode Milling Systems. 16th CIRP Conference on Modelling of Machining Operations, Cluny-France, Procedia CIRP, 58, 198-203.
  • June 2016   Tunc, L.T., Gu, Y., Burke, M.G., Effects of minimal quantity lubrication (MQL) on surface integrity in robotic milling of austenitic stainless steel. 3rd CIRP Conference on Surface Integrity (CIRP CSI), Charlotte, USA.
  • June 2015   Tunc L.T., Kopacka, J., Sulitka M., Integrated Simulation System for 5-axis milling cycles, 15th CIRP Conference on Modelling of Machining Operations, Karlsruhe, Germany.
  • Sept. 2014   Tunc L.T., Barnfather, J., Effects of Hexapod Robot Dynamics in Milling, 11th International Conference on High Speed Machining, Prague, Czech Republic.
  • June 2013   Yasa, E., Orhangül, A., Songüler, S. C., Platin, S., Baytok, E., Özlü, E., Tunc L.T., Budak, E. Assessment of machinability performance in 5-axis milling of inconel 718 alloy with different carbide grades, 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds.
  • Oct. 2011   Tunc L.T., Budak E., 2011, Effects of Cutting Conditions and Tool Geometry on Process Damping in Machining, 4th International Conference on Manfacturing Engineering, Thessaloniki, Greece.
  • Oct. 2010   Tunc L.T.,Ozkirimli O, Ozturk E.,Murtezaoglu Y., Budak E., 2010, Machining Strategy Development in 5-Axis Milling Operations Using Process Models, 4th CIRP International Conference on High Performance Cutting, Gifu, Japan
  • June 2010   Ozkirimli O.M., Tunc L.T., Budak E., 2010, Simulation of Multi-Axis Machining Processes Using Z-Mapping Technique, 6th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS, Ankara, Turkey.
  • Oct. 2009   Tunc L.T., Training on DELMIA modules, Assembly Design, Human Modeling, Assembly Process Simulation, TOYOTA Assembly Plant – Adapazari, Turkey
  • Sept.2008   Budak E., Tunc L.T., A New Method for Identification and Modeling of Process Damping in Machining, 1st International Conference on Process Machine Interactions, Hannover, Germany
  • Aug. 2007   Tunc L.T., Budak E., Optimization of 5-Axis Milling Processes Based on the Process Models with Application to Airfoil Machining, 10th CIRP International Workshop on Modeling of Machining Operations, Reggio Calabria, Italy
  • June 2007   Ozturk,E. Tunc L.T., Budak E., Machining Parameter and Strategy Selection in Multi Axis Milling of Sculptured Surfaces, 4th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Cesme, Turkey
  • May 2006   Tunc L.T., Budak E. , Ozturk,E., Optimization of 5-Axis Milling Processes Using Process Models – 9th CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia